www.BobsCB.com

Jeil Innotel (JCD-201M-HAM) - HAM Base Mic, For Icom/Kenwood or Yaesu HAM Radios

Description:

The JCD-201M is a highly sensitive desktop (base) microphone for HAM, 10-Meter, and CB radios.

This version, the JCD-201M-HAM, is a Professional Desktop Mic for Icom, Kenwood or Yaesu HAM Radios.

Please Note: This Desktop Mic is not compatible for CB or 10 Meter Radios.

The JCD-201M-HAM is supplied with one required microphone interconnecting cable (wired cord). All wired cords have an 8-Pin connector on one end for connection to the rear of the JCD-201M-HAM base microphone. The other end of the wired cord (the connection for the radio) is wired either for Icom(PID4249), Kenwood (PID4248), or Yaesu (PID4247) HAM Radios.

The microphone itself has two output connectors (Out-A / Out-B) and therefore can accommodate an optional second wired cord. There is a selector switch on the face of the microphone to redirect the microphone's output from Radio A to Radio B.

Jeil Innotel Co.

Features and Specifications:

• Professional Desktop Microphone
• For Icom, Kenwood or Yaesu HAM Radios
• Not Compatible for CB or 10 Meter Radios
• Gooseneck Microphone
• Highly Sensitive Electret Microphone
• VU Meter
• Dual Microphone Outputs (Out-A /Out-B) and an Output Selector Switch
• Switchable Compression - High, Low and a Separate Manual Control
• Modulation Switch for Optimum Audio Quality for Both FM and SSB
• Push-to-Talk (PTT) Button
• Accommodates an Optional Foot Controlled Push-to-Talk (PTT) Switch: PID4253
• Up / Down Buttons - Does Not Function Properly for All Radios
• Lock Key and Timeout Reset Function
• Non-Modulation Prevention Circuit
• On-Air LED
• Powered Via 3 AAA Batteries - Sold Separately
• Battery Check Function
• Explanation of Above Purchase Options:
  1. "1st Wired Cord - Required Selection":
     • You MUST Select One Wired Cord Based Upon the Primary Radio You Intend to Operate This Mic With. This Wired Cord is Included Free With the Mic:
       • JCD-201M Wired Cord for Icom HAM Radios
       • JCD-201M Wired Cord for Kenwood HAM Radios
       • JCD-201M Wired Cord for Yaesu HAM Radios
  2. "2nd Wired Cord - Optional Selection":
     • You CAN Select an Optional Second Wired Cord to Accommodate a Second Radio or to Have As a Spare. This Second Optional Wired Cord is $9.95:
       • JCD-201M Wired Cord for Icom HAM Radios
       • JCD-201M Wired Cord for Kenwood HAM Radios
       • JCD-201M Wired Cord for Yaesu HAM Radios
  3. "HY-101 Plastic Foot Switch - Optional Selection":
     • You CAN Select an Optional Foot Controlled Push-to-Talk (PTT) Switch for $11.95:
       • HY-101 Plastic Foot Switch
• Sold: Each

Jeil Innotel (JCD-201M-HAM) - HAM Base Mic